Kergy integral straight blade stabilizers are made of AISI 4145H alloy steel by one piece of integral bar. The stabilizer has four straight blades that pressed Tungsten Carbide buttons or other type of hardfacing are located on the surface of the blades. Ultrasonic inspection is performed on each stabilizer.
Working
OD.
inch(mm)
|
Tools OD.
inch(mm)
|
Up thread
API
|
Down thread
API
|
Water hole
inch(mm)
|
Fishing neck length
inch(mm)
|
Belt length
inch(mm)
|
Belt width
inch(mm)
|
Total length
inch(mm)
|
5-3/4″(146.1) | 4-3/4″(120.7) | NC38 | 2-1/4″(57.2) | 20″(508) | 12″(304.8) | 2″(50.8) | 55″(1397) | |
7-3/4″(196.9) | 6-1/2″(165.1) | NC50 | 2-13/16″(71.4) | 20″(508) | 16″(406) | 2-1/2″(63.5) | 60″(1524) | |
8″(203.2) | 6-1/2″(165.1) | NC50 | 2-13/16″(71.4) | 20″(508) | 16″(406) | 2-1/2″(63.5) | 60″(1524) | |
11-3/4″(298.5) | 8″(203.2) | 6-5/8″REG | 2-13/16″(71.4) | 20″(508) | 16″(406) | 3-1/2″(89) | 63″(1600) | |
12″(304.8) | 8″(203.2) | 6-5/8″REG | 2-13/16″(71.4) | 20″(508) | 16″(406) | 3-1/2″(89) | 63″(1600) | |
12-1/4″(311.1) | 8″(203.2) | 6-5/8″REG | 2-13/16″(71.4) | 20″(508) | 16″(406) | 3-1/2″(89) | 63″(1600) | |
17-1/2″(444.5) | 9″(228.6) | 7-5/8″REG | 3″(76.2) | 20″(508) | 18″(457) | 4-3/4″(120) | 72-1/2″(1840) | |
26″(660.4) | 9-1/2″(241.3) | 7-5/8″REG | 3″(76.2) | 30″(762) | 20″(508) | 4-3/4″(120) | 93″(2362) |
SHAANXI KERGY MECHANICAL EQUIPMENT CO.,LTD
TEL: +86-29-85578975 EXT. 8002 | MOBILE: +86-18792562982
E-MAIL: sales@kergyoilfield.com
ADD: ZHANGBA TWO ROAD, GAOXIN DISTRICT, XI'AN CITY, SHAANXI PROVINCE, CHINA